All DIY outlets have the sole purpose of providing power to a specific area or spot. Ground fault interrupter or GFI outlets are designed for your safety. Any place you can be wet and plug anything in is known by the universal building code or UBC as a hazard zone for an electrical shock. IE kitchen sink counter area or a bathroom vanity for any type of personal grooming appliance, the GFI will sense a hazard before the shock comes to anything first allowing the GFI outlet to be reset at the same location. DIY outlets come in a variety of colors, styles and finishes to match the switches at the wall or the appliances in the kitchen.

DIY GFI electrical Outlet: for your safety convenience

DIY 15 amp electrical Outlet: lighting and general home electrical power

DIY 20 amp electrical Outlet: small appliances such as hair dryer or some microwave ovens

DIY 30 amp electrical Outlet: Laundry area or utility room

DIY higher power needs: shop sub-panel or heavy equipment usage zone

Electrical options very as well as any the key here is to not over or under power the components involved, get the right information and study up, be patient and save. All avenues are easily upgraded or altered to your taste but be sure to do the homework and check the local codes in your areas. Dimmers, stack, or even digital switches are available, a simple 3-way switch often will alleviate extra steps in any room or area of your home.Upgrading the outlets can clean up the look of your room quickly or adding an extra plug is fairly simple in most cases, just leg off the closest existing one.Some patching may be needed but with a bag of 20min Hamiltons or WestPac dry mix it’s easier than you may think. Most older homes are set up with only 100amp service panels and its sometimes hard to get all you want or need before an initial upgrade is required, this may take a professional, but may be worth the cost if you buy the materials and the building permit needed first. Typical wiring is based on thickness IE. 10/12/14 gauge in most cases, follow the local codes for sure as to your application[s] here, nobody wants a problem, period. The bulbs today are highly energy efficient, fairly inexpensive to purchase and you will see the difference in your electtric bills immediately.

Punch in the keyword in the search box below: